Studio Support Equipment

 
View as:


4 Spigot Light Holder 4 Lights to 1 Stand

4 Spigot Light Holder 4 Lights to 1 Stand

This bracket allows you to mount 4 lights to 1 single light stand. It's good for those that require 4 LED panel lights to be mounted onto a single light stand for wider exposure coverage. Length from 1 end to another end is 60cm. Made of strong...
RM118.00 Buy Now 
5 Spigot Light Holder 5 Lights to 1 Stand

5 Spigot Light Holder 5 Lights to 1 Stand

This bracket allows you to mount 4 lights to 1 single light stand. It's good for those that require 5 LED panel lights to be mounted onto a single light stand for wider exposure coverage. Length from 1 end to another end is 75cm. Made of strong...
RM138.00 Buy Now 
C-STAND HEAVY DUTY STAINLESS STEEL BOOM WITH SLIDING LEG

C-STAND HEAVY DUTY STAINLESS STEEL BOOM WITH SLIDING LEG

This is a heavy duty century stand (c-stand) with a sliding leg (lift leg). One of the legs is adjustable to adapt onto any surface higher than the ground. Specifications: Minimum height: 1450mm/57" Maximum height: 3280mm/114.2" Closed...
RM449.00 Buy Now 
2.6m Alloy Medium Duty Light Stand

2.6m Alloy Medium Duty Light Stand

This 8.6ft stand is the most robust and heaviest version of our typical light stand. Made from strong aluminum alloy, it can be used with reflector, boom stand, studio light, speedlite, and background. Strong enough to hold most equipment yet...
RM86.00 Buy Now 
2m Compact Portable Light Stand

2m Compact Portable Light Stand

This is a compact 2m height light stand that is very portable when folded. With screw mount at the tip of the stand for mounting various accessories and flash. Made of aluminum for light weight and strength. Specifications: Minimum height: 485mm....
RM89.00 Buy Now 
3 Section Double Articulating Arm YA5039

3 Section Double Articulating Arm YA5039

Specification: •  Aluminum Polymer Material •  5/8" Stud •  4.5kg Loading Capacity •  12 Inch Each Section Arm •  3/8" Screw Thread Hole...
RM89.00 Buy Now 
3m x 3m Heavy Duty Backdrop Stand with Bag

3m x 3m Heavy Duty Backdrop Stand with Bag

This backdrop stand holds all kinds of backdrops include cotton muslin, paper or vinyl. The length is extendable up to 10ft (3m) in length.    Features: Height of 3m Max width of 3m (10ft) Max load of 10kg Easy to set up Comes with free...
RM279.00More info
Adjustable Telescopic Bar 3m for Backdrop or Overhead Support

Adjustable Telescopic Bar 3m for Backdrop or Overhead Support

This is a 3m length adjustable telescopic bar for overhead support of equipment and backdrop.  Specs:  - Max length: 305cm - Min length: 115cm - Sections: 3 - Adjustment: stepless 
RM89.00More info
 Sold Out 
Automatic Air Cushioned Light Stand 2.2M

Automatic Air Cushioned Light Stand 2.2M

   Ensure your light safety with this quickfold air cushioned light stand. The air cushioned mechanism lower the risk of light damage in case of forgetting to lock the tube lock. Specification: Minimum height: 715mm. Maximum height:...
RM128.00 Buy Now 
Automatic Air Cushioned Light Stand 2.4M

Automatic Air Cushioned Light Stand 2.4M

   Ensure your light safety with this quickfold air cushioned light stand. The air cushioned mechanism lower the risk of light damage in case of forgetting to lock the tube lock. Specification: Minimum height: 740mm. Maximum height:...
RM148.00 Buy Now 
Automatic Air Cushioned Light Stand 2.8M

Automatic Air Cushioned Light Stand 2.8M

   Ensure your light safety with this quickfold air cushioned light stand. The air cushioned mechanism lower the risk of light damage in case of forgetting to lock the tube lock. Specification: Minimum height: 835mm. Maximum height:...
RM168.00 Buy Now 
Basic 2.4m Light Stand

Basic 2.4m Light Stand

This is a basic 2m 3 Section Light Stand. At the top end of the stand comes with 1/4" screw mount to mount various types of flash accessories and flash. It is made of aluminum for light weight and strength. Specs: Max height: 2.4m Folded...
RM59.00 Buy Now 
Basic 2m Light Stand

Basic 2m Light Stand

This is a basic 2m 3 Section Light Stand. At the top end of the stand comes with 1/4" screw mount to mount various types of flash accessories and flash. It is made of aluminum for light weight and strength. Specs: Max height: 2m Folded length:...
RM39.00 Buy Now 
C Clamp with Spigot Connector YA5035

C Clamp with Spigot Connector YA5035

Specification: - Photo studio multi-function clamp with ball head for camera/flash stand. - Heavy duty camera mount clamp, stable and durable, camera or photo studio can be firmly fixed on the clamp. - Can also be taken as a backup when...
RM38.00 Buy Now 
EBH-129 Boom Pole Holder

EBH-129 Boom Pole Holder

   The Boom Mate Boom Pole Holder allows hands free operation when working with boom poles. It attaches to standard grip heads which allow mounting to lighting stands. Multiple or single boom poles can be positioned and used without a boom...
RM68.00 Buy Now